Switches and routers

network switch is a small hardware device that joins multiple computers together within one local area network (LAN). Technically, network switches operate at layer two (Data Link Layer) of the OSI model.

Network switches appear nearly identical to network hubs, but a switch generally contains more intelligence (and a slightly higher price tag) than a hub. Unlike hubs, network switches are capable of inspecting data packets as they are received, determining the source and destination device of each packet, and forwarding them appropriately. By delivering messages only to the connected device intended, a network switch conserves network bandwidth and offers generally better performance than a hub.

As with hubs, Ethernet implementations of network switches are the most common. Mainstream Ethernet network switches support either 10/100 Mbps Fast Ethernet or Gigabit Ethernet (10/100/1000) standards.

Different models of network switches support differing numbers of connected devices. Most consumer-grade network switches provide either four or eight connections for Ethernet devices. Switches can be connected to each other, a so-called daisy chaining method to add progressively larger number of devices to a LAN.

ROUTERS

In packet-switched networks such as the Internet, a router is a device or, in some cases, software in a computer, that determines the next network point to which a packet should be forwarded toward its destination. The router is connected to at least two networks and decides which way to send each information packet based on its current understanding of the state of the networks it is connected to. A router is located at any gateway (where one network meets another), including each point-of-presence on the Internet. A router is often included as part of a network switch.

Ask your router questions at ITKnowledgeExchange.com

A router may create or maintain a table of the available routes and their conditions and use this information along with distance and cost algorithms to determine the best route for a given packet. Typically, a packet may travel through a number of network points with routers before arriving at its destination. Routing is a function associated with the Network layer (layer 3) in the standard model of network programming, the Open Systems Interconnection (OSI) model. A layer-3 switch is a switch that can perform routing functions.

An edge router is a router that interfaces with an asynchronous transfer mode (ATM) network. A brouter is a network bridge combined with a router.

For home and business computer users who have high-speed Internet connections such as cable, satellite, or DSL, a router can act as a hardware firewall. This is true even if the home or business has only one computer. Many engineers believe that the use of a router provides better protection against hacking than a software firewall, because no computer Internet Protocol address are directly exposed to the Internet. This makes port scans (a technique for exploring weaknesses) essentially impossible. In addition, a router does not consume computer resources as a software firewall does. Commercially manufactured routers are easy to install, reasonably priced, and available for hard-wired or wireless networks.

Also see bridge, gateway, hub, and switch.

Getting started with routers

To explore how routers are used in the enterprise, here are some additional resources:

A router by any other name is still a router: Learn about what a router does, the difference between a router and a switch, and what to consider when selecting a router for your home or your business.

Tasks for initial router configuration: Unlike some devices, routers require quite a bit of configuration before they will be useful. This tip examines the minimum tasks needed to get a Cisco router working.

Ten quick router security tips: Network administrators need to know the basics in router security. This quick tip lists10 basic router security tips.